This document describes the use of fidoconfig to make fido work on your favorite platform.
This document applies to version 1.9 of fidoconfig.
The design goal of fidoconfig was to provide one config-file for several different fido software packages like editor, tosser etc. An additional aim was to have one library (fidoconfig) which can be used by all programs. The advantage is you only have to edit one config-file, so changing your system is much easier than with common software packages. Also bugs can only creep in one library and not in thousands over thousands libraries. The config definition can be used in all operating systems. Also the library should be quite portable.
This chapter describes how a fidoconfig config-file is written, which keywords exist and where to put the file.
The fidoconfig library searches the config file on different locations:
If you compile library with huskymak.cfg, the location will be overset with CFGDIR parameter.
Additionally you can set an enviroment variable called FIDOCONFIG which
points to the file:
set FIDOCONFIG=e:\bbs\fidoconfig\config
FIDOCONFIG=~/fidoconfig/config
export FIDOCONFIG
The config file(s) must be readable. If you plan using the autoareacreate feature of HPT / autofilecreate featute of HTick / etc..., the config file(s) must be writeable.
All symbols are not case-sensitive.
{<whiteSpace>} at the start of the line will be ignored.
All keywords are evaluated as occurring, the first matching keyword found is valid. If there are more then one keywords of the same type allowed, the last line matching the situation is valid. Another words: second definition overwrites the previous one. If no match is found, a default value will be used.
"#" at the start of a line or <whiteSpace>#<whiteSpace> within the
line starts a comment. The comment ends with the line. Comment char "#" can
be overwritten by commentChar token.
If the first word in a line is an undefined keyword, program exits with error message.
Each keyword has to start a new line.
Keyword parameters:
<integer>1234567890
<string><bool><addr>2:5000/117
<file><path>Note! [<parameter>] means that it can be omitted.
FIDOCONFIG library can set up internal variables:
set basedir=/home/user/fido/
[OS] variable is automatically set up for following operating systems:
You can set something like:
if [OS]==UNIX
tearline `uptime`
endif
Some programs can be compiled with module variable. It can be used to speed up config parsing:
if [module]==htick
include /etc/ftn/fileareas
endif
And if HPT is running, fileareas aren't parsed because [module]==hpt.
There are following modules available:
Also external variables can be parsed:
autoexec.bat:
SET VAR=myvar
fidoconfig:
if [VAR]==myvar
...
else
...
endif
ifdef UNIX
MsgBaseDir [home]/msgbase
endif
You can use external programs output via `cmd`. It is available
only for UNIX & OS/2+EMX:
Name Power Station under `uname -mrs`
List of the additional commands:
set, if, if not, else, elseif, ifdef, ifndef, endif.
You can compare with a pattern by using =~ and !~ instead of == and !=:
if [VAR] =~ *substr*
...
endif
if [VAR] !~ bla?bla*
...
endif
These keywords may be used by several programs. More specific keywords you can find in the programs' individual documentations.
This section contains keyword-list only. Read HPT Manual for more info.
accessgrp
address
addtoseen
advancedareafix
advisorylock
afterunpack
aka
allowemptypktpwd
allowpktaddrdiffer
arcmailsize
arcnetmail
areafix
areafixecholimit
areafixfrompkt
areafixhelp
areafixReportsAttr
areafixkillrequests
areafixmsgsize
areafixnames
areafixorigin
areafixpwd
areafixqueryreports
areafixqueuefile
areafixsplitstr
areafixfromname
areasfilenamecase
areasmaxdupeage
autoareacreate
autoareacreatedefaults
autoareacreatefile
autoareacreateflag
autoareacreatesubdirs
autopassive
autopause
availlist
badarea
beforepack
bundlenamestyle
carbonaddr
carbonandquit
carboncopy
carbondelete
carbonexcludefwdfrom
carbonextern
carbonfrom
carbonfromarea
carbongroups
carbonkeepsb
carbonkludge
carbonmove
carbonout
carbonreason
carbonrule
carbonsubj
carbontext
carbonto
createareascase
createfwdnonpass
dailybundles
defarcmailsize
denyfwdfile
denyfwdmask
denyfwdreqaccess
denyuncondfwdreqaccess
disablekludgerescanned
disabletid
disablepid
dupearea
dupebasetype
dupehistorydir
echoarea
echoareadefaults
echomailflavour
echotosslog
excludepassthroughcarbon
export
filebox
fileboxalways
fileboxesdir
forwardareapriority
forwardpkts
forwardrequestfile
forwardrequestmask
forwardrequests
forwardrequesttimeout
hptperlfile
idlepassthrutimeout
ignorecapword
ignoreseen
import
importlog
inbound
include
intab
keeptrsfiles
keeptrsmail
killedrequesttimeout
kludgeareanetmail
level
link
linkbundlenamestyle
linkdefaults
linkfilebasedir
linkgrp
linkmsgbasedir
linkwithimportlog
localarea
localinbound
lockfile
logechotoscreen
mandatory
mindiskfreespace
msgbasedir
name
netarea
netmailarea
netmailextern
netmailflag
netmailflavour
newarearefusefile
noprocessbundles
norules
notvalidfilenamechars
optgrp
origin
ouraka
outbound
outtab
pack
packaka
packer
packnetmailonscan
password
pause
pktpwd
pktsize
processpkt
protinbound
publicgroup
reducedseenby
remap
remoterobotname
reportto
robotsarea
route
routefile
routemail
rulesdir
separatebundles
setconsoletitle
statlog
sysop
tearline
tempinbound
tempoutbound
tossingext
unpack
This section contains keyword-list only. Read HTick Manual for more info.
AddDLC
AnnAreaTag
AnnAddrfrom
AnnAddrto
AnnExclude
AnnFileOrigin
AnnFileRFrom
AnnFrom
AnnInclude
AnnMessFlags
AnnOrigin
AnnounceSpool
AnnSubj
AnnTo
AutoFileCreateFlag
BbsArea
BusyFileDir
ConvertLongNames
ConvertShortNames
DLCDigits
ExecOnFile
FileArea
FileAreaBaseDir
FileAreaCreatePerms
FileDescPos
FileAreaDefaults
FileDescName
FileEchoFlavour
FileLDescString
FileFixFromName
FileFixHelp
FileFixReportsAttr
FileFixKillRequests
FileFixNames
MaxTicLineLength
OriginInAnnounce (obsoleted)
PassFileAreaDir
SaveTic
TicOutbound
In Link section:
AutoFileCreate
AutoFileCreateDefaults
AutoFileCreateFile
AutoFileCreateSubdirs
DelNotRecievedTIC
FileFixEchoLimit
FileFixFSC87Subset
ForwardFilePriority
ForwardFileRequestFile
ForwardFileRequests
NoTIC
LinkFileBaseDir
PackAka
RemoteFileRobotName
TickerPackToBox
nodelistDir <path>
nodelistDir /var/spool/fido/nodelist
This command specifies the path where the actual nodelists are or should be written to. This path contains the raw nodelist (see nodelist). Also, compiled nodelists like the FIDOUSER.LST will be stored here.
This statement cannot be repeated.
fidoUserList <filename>
fidoUserList fidouser.lst
If this keyword is present, the nodelist compiler (e.g. ulc) is
instructed to build a user list file with the given filename in the nodelist
directory (see nodelistdir). This is a simple text file with fixed line
length that contains user names (nodes, points) and their corresponding node
or pointnumbers. The file is sorted alphabetically by user name (case
insensitive), so that it can be bsearched to implement a quick node numer
lookup functinality. The fido user list file format is understood by
msged, for example.
Nodelist <name>
Nodelist nodelist or Nodelist points24
This statement starts a new nodelist definition. All the following
nodelist-related stamtements change the configuration of this nodelist until
a new nodelist statement is found.
The name that you specify must match the base name (without extension and
without pathname) of the raw, unpacked, nodelist file. The husky tools
ulc and nlupdate math the file name case-insensitively, but
other tools may need the exact spelling. The raw nodelist file is
expected to reside in the nodelist directory (see nodelistdir).
DiffUpdate <path_and_basname>
DiffUpdate /var/spool/filebase/nodediff/nodediff
Here you can specify the base filename of nodelist difference files (nodediffs) that are used to keep the corresponding nodelist up to date. The argument to the DiffUpdate is the full file name with path of a difference file, without the file extension. For example, if you have a file area at /var/spool/filebase/24000, where your ticker places the updates for the German Pointlist, and those update files are called points24.a26, points24.a33, and so on, you would use
DiffUpdate /var/spool/filebase/24000/points24
The Diffupdate keyword is used by nlupdate, for example. The
nodelist updater will unpack the difference file (if it is archived, of
course, unpacked diffs are also supported), apply the diff to the
corresponding nodelist, and delete the temporary unpacked diff again.
FullUpdate <path_and_basname>
FullUpdate /var/spool/filebase/nodelist/nodelist
This statement works like DiffUpdate (see diffupdate). The
difference is that here you don't specify the location of a nodelist
difference file, but the locations where complete nodelist files/archives can
be found. Some othernets do not (regularly) distribute a nodediff file, but
just hatch a new nodelist every few weeks. In this case, you need the
FullUpdate statement.
DefaultZone <zone>
DefaultZone 2
Some nodelist files do not start with a ‘Zone’ entry. This is the case
for the German Points24 list, for example, but could also happen for
othernets that only have one zone. In this case, you can use the
DefaultZone keyword to specify the default zone number for all nodes
listed in this nodelist.
Nodelistformat <format>
NodelistFormat standard
NodelistFormat points4d
NodelistFormat points24
Here you can specify the format of the unpacked nodelist. The default is ‘standard’; this is the normal Fidonet nodelist format. You can also specify ‘points4d’, which is needed for the nodelist compiler to recognise a standart pointlist in 4D format or ‘points24’ for the German points24 format as such, so that it can see the proper 5D point numbers instead of the fakenet numbers.
delAppliedDiff <bool>
delAppliedDiff on ordelAppliedDiff off
NLTools can delete nodediffs after applying them if you set delAppliedDiff to on.
Default is off
This token can't be repeated.
Common tokens:
Link definition tokens:
sendMailCmd string
sendMailCmd /usr/sbin/sendmail $a <$f
This keyword is used to define send mail command & its parameters. Macro '$a' specifies position of the recipient e-mail address; macro '$f' specifies position of name of file with message body. If '$f' is omitted then message body will be taken from stdin.
This statement can't be repeated.
email <email-address>
email eddie@ironmaiden.com
This keyword is used to set the email-address for the link. This can be used to send pkts via email.
This statement can only be repeated for different links.
emailFrom <email-address>
emailFrom fred@ironmaiden.com
This keyword is used to set the email-address used as sender address for outgoing emails to this link.
This statement can only be repeated for different links.
emailSubj <subject>
emailSubj Fido over EMail message in UUE format
This keyword is used to set the subject for emails to and from this link. It may be ignored by some encodings (e.g. SEAT).
This statement can only be repeated for different links.
emailEncoding (MIME | SEAT | UUE)
emailEncoding MIME
This keyword is used to set the encoding for outgoing emails to this link.
This statement can only be repeated for different links.
This section contains keyword-list only. Read BsoPack Manual for more info.
maxunpackednetmail
packnetmail
Herp is the Husky External file Request Processor. The following fidoconfig keywords are specific to herp. Some programs of herp, in particular herpidx, also use part of the htick configuration, i.E. filearea definitions.
reqidxDir <path>
reqidxDir /var/spool/fido/reqidx
This command specifies a subdirectory which will be used to store the request index generated by herpidx. This subdirectory should be writable for the herpidx process and at least readable for the user under which your mailer and herp will be run. herpidx will place various request index files here. The subdirectory should not be used for any other purposes. The index can become rather large, so plan for enough free disk space.
# sample fido config file
version 0.14 # test for new stripComment
Name hpt-HQ
Location Paderborn, GER
Sysop Matthias Tichy
LogLevels 456789
Address 2:2432/645
Address 44:4932/110
Address 21:499/976
Address 49:199/976
Address 54:490/976
Address 64:199/976
Address 530:199/976
# This is taken from Serge Koghin's ParToss
# Hope he wouldn't be angry for this
# ATTENTION the commented lines are not tested by me (mtt)
# and will mostly be only useful on dos-systems
Unpack "unzip -j -Loqq $a -d $p" 0 504b0304
Unpack "\path\pkzipc -ext -dir=none -over=all -nozip -silent $a $p $f" 0 504b0304
#Unpack "pkunzip -njCL $a -d $p $f" 0 504b0304
#Unpack "pkzip25 -ext -silent -over=all -nofix -nozip $a $p $f" 0 504b0304
Pack zip zip -9 -j -q $a $f
Unpack "arc eno $a $p'*.*'" 0 1a
#Unpack "pkunpak /r $a $p" 0 1a
#Pack arc pkpak -oct a $a $f
#Unpack "pak e /wn $a $p" -2 fe
#Pack pak pak a $a $f
#Unpack "lha e /m $a $p" 2 2d6c68
#Pack lha lha a /o /m $a $f
#Unpack "zoo e:O $a $p" 0 5a4f4f
#Pack zoo zoo a: $a $f
#Unpack "arj e -+ -y $a $p" 0 60ea
# Unpack "cd $p && /usr/bin/unarj e $a > /dev/null" 0 60ea # for Linux
#Pack arj arj a -+ -e -y $a $f
# *.rar
Unpack "unrar e -y -c- -inul $a $p $f" 0 52617221
# rar-sfx/DOS
Unpack "unrar e -y -c- -inul $a $p $f" 28 52534658
#Pack rar rar a -std -ep $a $f
#Unpack "jar e -y $a $p" 14 1a4a61721b
#Pack jar jar a -y $a $f
#Unpack "ha eyq $a" 0 4841
#Pack ha ha a21eq $a $f
# include /etc/fido/areas
Link Matthias Schniedermeyer
Aka 2:2432/600
ourAka 2:2432/645
Password xxxxxxxxx
EchoMailFlavour Crash
AutoAreaCreate on
areafixAutoCreateDefaults -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11
AutoFileCreate on
forwardRequests on
Packer zip
Link Matthias Schniedermeyer
Aka 44:4932/100
ourAka 44:4932/110
password xxxxxxxx
EchoMailFlavour Crash
AutoAreaCreate on
AutoFileCreate on
areafixAutoCreateDefaults -a 44:4932/110 -b Squish -p 14 -dupeCheck move -dupeHistory 11
Packer zip
Link Carsten Ellermann
Aka 2:2432/215
ourAka 2:2432/645
password xxxxxxx
autoAreaCreate on
areafixAutoCreateDefaults -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11
autoFileCreate on
Link Matthias Tichy
Aka 2:2432/646
ourAka 2:2432/645
Password xxxxxxxx
autoAreaCreate on
areafixAutoCreateDefaults -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11
forwardPkts on
Link Matthias Tichy
Aka 21:499/980
ourAka 21:499/976
Password xxxxxxx
autoAreaCreate on
areafixAutoCreateDefaults -a 21:499/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11
forwardPkts on
Link Matthias Tichy
Aka 49:199/980
ourAka 49:199/976
Password xxxxxxxx
autoAreaCreate on
areafixAutoCreateDefaults -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11
forwardPkts on
Link Matthias Tichy
Aka 54:490/980
ourAka 54:490/976
Password xxxxxxx
autoAreaCreate on
areafixAutoCreateDefaults -a 54:490/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11
forwardPkts on
Link Matthias Tichy
Aka 64:199/980
ourAka 64:199/976
Password xxxxxxxx
autoAreaCreate on
areafixAutoCreateDefaults -a 64:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11
forwardPkts on
Link Matthias Tichy
Aka 530:199/980
ourAka 530:199/976
Password xxxxxxxx
autoAreaCreate on
areafixAutoCreateDefaults -a 530:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11
forwardPkts on
Link Matthias Born
Aka 2:240/6223
ourAka 2:2432/645
Password xxxxxxx
EchoMailFlavour hold
Packer zip
Link Matthias Born
Aka 44:4932/120
ourAka 44:4932/110
Password xxxxxxx
EchoMailFlavour hold
Packer zip
Link Sascha Silbe
Aka 2:2435/424
ourAka 2:2432/645
AutoFileCreate on
Password xxxxxxxx
Link Sascha Silbe
Aka 54:490/963
ourAka 54:490/976
AutoFileCreate on
Password xxxxxxxxx
Link Alfred Cleve
Aka 2:244/6260
ourAka 2:2432/645
password xxxxxxxxxxx
packer zip
EchoMailFlavour crash
autoAreaCreate on
areafixAutoCreateDefaults -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11
; +++ FREEPNT-MARKE +++
#route crash 2:2433/1245 *
#route hold 2:2433/1247.100 2:2433/1247.100
#route Crash 2:2433/1245 2:2433/*
#route hold noroute 2:2433/1245.*
#route crash host 2:2433/*
#route crash enc no-route *
route hold noroute 2:2432/645.*
route hold noroute 2:240/6223.*
route crash noroute 2:2432/646
route hold 44:4932/120 44:4932/120 44:4932/130
Route crash 44:4932/100 44:*
Route crash 49:199/980 49:*
Route crash 54:490/980 54:*
Route crash 530:199/980 530:*
Route normal 2:2435/424 2:2435/*
Route crash 2:2432/646 *
Inbound /home/mtt/fido/in/
ProtInbound /home/mtt/fido/in.sec
LocalInbound /home/mtt/fido/in.loc
Outbound /home/mtt/fido/out/
tempOutbound /home/mtt/fido/out.tmp
tempInbound /home/mtt/fido/in.tmp
#MsgBaseDir Passthrough
MsgBaseDir /home/mtt/fido/msgb
FileAreaBaseDir /home/mtt/fido/files
public /home/mtt/fido/public
# public /home/mtt/fido/public2
# intab /home/mtt/fido/recode/outaltkoi8
# outtab /home/mtt/fido/recode/outkoi8alt
echotosslog /home/mtt/fido/echotoss.log
importlog /home/mtt/fido/import.log
logFileDir /home/mtt/fido/hpt/linux
DupeHistoryDir /home/mtt/fido/dupes
NodelistDir /home/mtt/fido/nodelist
PassFileAreaDir /home/mtt/fido/passFileDir
magic /home/mtt/fido/magic
lockfile /home/mtt/fido/lock
areafixhelp /home/mtt/fido/hpt/misc/areafix.hlp
FileFixHelp /home/mtt/fido/htick/misc/filefix.hlp
AreafixReportsAttr loc pvt k/s npd dir
FilefixReportsAttr loc pvt k/s npd dir
NodeList nodelist
DiffUpdate /home/mtt/fido/files/nodediff
NodeList unionnet
Nodelist geonode
Nodelist linuxnet
DiffUpdate /home/mtt/fido/files/lin44.node
NetmailArea NetmailArea /home/mtt/fido/msgb/netmail -b msg
# NetmailArea NetmailArea /home/mtt/fido/msgb/net -b Squish
BadArea BadArea /home/mtt/fido/msgb/bad -b Squish
DupeArea DupeArea /home/mtt/fido/msgb/dupe -b Squish
EchoArea 2432.points /home/mtt/fido/msgb/2432/points -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea 2432.Talk /home/mtt/fido/msgb/2432/talk -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea C_ECHO.ger /home/mtt/fido/msgb/c_echo_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea C_PLUSPLUS.ger /home/mtt/fido/msgb/c_plpl_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea binkley /home/mtt/fido/msgb/binkley -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea Binkley.ger /home/mtt/fido/msgb/binkley_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea hardrock.ger /home/mtt/fido/msgb/hardrock_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea linux.ger /home/mtt/fido/msgb/linux/ger -a 2:2432/645 -b Squish -p 14 -dupecheck move -dupeHistory 11 2:2432/646
echoArea linux.develop.ger /home/mtt/fido/msgb/linux/develop_g -a 2:2432/645 -b Squish -dupeCheck move -dupeHistory 11 2:2432/646
EchoArea os2.base.ger /home/mtt/fido/msgb/os2/base_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea os2.beta.ger /home/mtt/fido/msgb/os2/beta_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea os2bbs.ger /home/mtt/fido/msgb/os2/bbs_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea os2.debate.ger /home/mtt/fido/msgb/os2/debate_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea os2.install.ger /home/mtt/fido/msgb/os2/install_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea Os2.wps.ger /home/mtt/fido/msgb/os2/wps_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea Os2.prog.ger /home/mtt/fido/msgb/os2/prog_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea Os2.lan.ger /home/mtt/fido/msgb/os2/lan_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea os2.hw.ger /home/mtt/fido/msgb/os2/hw_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea os2.online.ger /home/mtt/fido/msgb/os2/online_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea os2.tec.ger /home/mtt/fido/msgb/os2/tec_g -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea OWL.Newfiles /home/mtt/fido/msgb/owl/newfiles -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea owl.announce /home/mtt/fido/msgb/owl/announce -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea owl.flea /home/mtt/fido/msgb/owl/flea -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea owlserver.news /home/mtt/fido/msgb/owl/snews -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea Paderborn.Flohmarkt /home/mtt/fido/msgb/pader/floh -a 2:2432/645 -b Squish -p 14 2:2432/600
EchoArea Tolkien.ger /home/mtt/fido/msgb/tolkien_g -a 2:2432/645 -b Squish -dupeCheck move -p 14 2:2432/600
EchoArea Schweden.ger /home/mtt/fido/msgb/schweden_g -a 2:2432/645 -b Squish -tinySB -p 14 2:2432/600
LocalArea carbonArea /home/mtt/fido/msgb/carbonArea -b Squish
CarbonTo Matthias Tichy
CarbonCopy carbonArea
EchoArea paderborn.mailbox /home/mtt/fido/msgb/paderborn.mailbox -a 2:2432/645 -b Squish -dupeCheck move -dupeHistory 11 -p 14 2:2432/600
EchoArea owl.allfix /home/mtt/fido/msgb/owl.allfix -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea fidosoft.winpoint.ger /home/mtt/fido/msgb/fidosoft.winpoint.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea net_dev.ger /home/mtt/fido/msgb/net_dev.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea net_dev /home/mtt/fido/msgb/net_dev -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea fidosoft.ger /home/mtt/fido/msgb/fidosoft.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea linux.bbs /home/mtt/fido/msgb/linux.bbs -a 44:4932/110 -b Squish -p 14 -dupeCheck move -dupeHistory 11 44:4932/100
EchoArea linux.software /home/mtt/fido/msgb/linux.software -a 44:4932/110 -b Squish -p 14 -dupeCheck move -dupeHistory 11 44:4932/100
EchoArea linux.setup /home/mtt/fido/msgb/linux.setup -a 44:4932/110 -b Squish -p 14 -dupeCheck move -dupeHistory 11 44:4932/100
EchoArea linux.reg /home/mtt/fido/msgb/linux.reg -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea linux.netzwerk /home/mtt/fido/msgb/linux.netzwerk -a 44:4932/110 -b Squish -p 14 -dupeCheck move -dupeHistory 11 44:4932/100
EchoArea linux.announce /home/mtt/fido/msgb/linux.announce -a 44:4932/110 -b Squish -p 14 -dupeCheck move -dupeHistory 11 44:4932/100
EchoArea linux.hardware /home/mtt/fido/msgb/linux.hardware -a 44:4932/110 -b Squish -p 14 -dupeCheck move -dupeHistory 11 44:4932/100
EchoArea darkness.info /home/mtt/fido/msgb/darkness.info -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea linux.coord /home/mtt/fido/msgb/linux.coord -a 44:4932/110 -b Squish -p 14 -dupeCheck move -dupeHistory 11 44:4932/100
EchoArea 2432.nodes.info /home/mtt/fido/msgb/2432.nodes.info -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea linux.office /home/mtt/fido/msgb/linux.office -a 44:4932/110 -b Squish -p 14 -dupeCheck move -dupeHistory 11 44:4932/100
EchoArea linux.develop /home/mtt/fido/msgb/linux.develop -a 44:4932/110 -b Squish -p 14 -dupeCheck move -dupeHistory 11 44:4932/100
EchoArea linux.x /home/mtt/fido/msgb/linux.x -a 44:4932/110 -b Squish -p 14 -dupeCheck move -dupeHistory 11 44:4932/100
EchoArea 2432.nodes /home/mtt/fido/msgb/2432.nodes -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea fido2000.ger /home/mtt/fido/msgb/fido2000.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea java.ger /home/mtt/fido/msgb/java.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea ftsc_public /home/mtt/fido/msgb/ftsc_public -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/646
EchoArea BINKLEY.DEVELOP /home/mtt/fido/msgb/binkley.develop -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/215
FileArea binkley.dev /home/mtt/fido/files/binkley.dev -a 2:2432/645 -d "Binkleyterm Development: Source Diffs, Misc, stuff" 2:2432/215
FileArea btxebos2 /home/mtt/fido/files/btxebos2 -a 2:2432/645 -d "Binkleyterm Development: Beta Binaries for OS/2" 2:2432/215
FileArea btxebsrc /home/mtt/fido/files/btxebsrc -a 2:2432/645 -d "Binkleyterm Development: Beta Source" 2:2432/215
FileArea btxebw32 /home/mtt/fido/files/btxebw32 -a 2:2432/645 -d "Binkleyterm Development: Beta Binaries for Win32" 2:2432/215
EchoArea golded.ger /home/mtt/fido/msgb/golded.ger -b Squish -a 2:2432/645 -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea fidosoft.husky /home/mtt/fido/msgb/fidosoft.husky -b Squish -a 2:2432/645 -dupeCheck move -dupeHistory 11 2:2432/646 2:240/6223
EchoArea darkness.points /home/mtt/fido/msgb/darkness.points -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea linux.fido.ger /home/mtt/fido/msgb/linux.fido.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/646
EchoArea FUSSBALL.GER /home/mtt/fido/msgb/fussball.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea PGP.GER /home/mtt/fido/msgb/pgp.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea HARDWARE.SCSI.GER /home/mtt/fido/msgb/hardware.scsi.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea TV.GER /home/mtt/fido/msgb/tv.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea CDWRITER.GER /home/mtt/fido/msgb/cdwriter.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea FASTECHO.GER /home/mtt/fido/msgb/fastecho.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea URTEILE.GER /home/mtt/fido/msgb/urteile.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea PRO_WRESTLING /home/mtt/fido/msgb/pro_wrestling -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea SPORT.EISHOCKEY.GER /home/mtt/fido/msgb/sport.eishockey.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea RAETSEL.GER /home/mtt/fido/msgb/raetsel.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea WRESTLING.GER /home/mtt/fido/msgb/wrestling.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea JAZZ.GER /home/mtt/fido/msgb/jazz.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea TV.SITCOM.GER /home/mtt/fido/msgb/tv.sitcom.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea FAEKAL.GER /home/mtt/fido/msgb/faekal.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea STEUER.GER /home/mtt/fido/msgb/steuer.ger -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/600
EchoArea LINUX.TALK /home/mtt/fido/msgb/linux.talk -a 44:4932/110 -b Squish -p 14 -dupeCheck move -dupeHistory 11 44:4932/100
EchoArea LINUX /home/mtt/fido/msgb/linux -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/646 2:240/6223
EchoArea FTN.BACKBONE.INFO /home/mtt/fido/msgb/ftn.backbone.info -a 2:2432/645 -b Squish -p 14 -dupeCheck move -dupeHistory 11 2:2432/646
FileArea 24000 /home/mtt/fido/files/24000 -a 2:2432/645 2:2432/600
FileArea NODEDIFF /home/mtt/fido/files/nodediff -a 2:2432/645 2:2432/600
FileArea LIN44.NODE /home/mtt/fido/files/lin44.node -a 44:4932/110 44:4932/100
FileArea LIN44.POINT /home/mtt/fido/files/lin44.point -a 44:4932/110 44:4932/100
EchoArea GN.ALLGEMEIN /home/mtt/fido/msgb/gn.allgemein -a 54:490/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 54:490/980
EchoArea GN.ANNOUNCE /home/mtt/fido/msgb/gn.announce -a 54:490/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 54:490/980
EchoArea SN.GEW.IGMEDIEN.ALLG /home/mtt/fido/msgb/sn.gew.igmedien.allg -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.RECHT.ARB.URTEILE /home/mtt/fido/msgb/sn.recht.arb.urteile -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.RECHT.SOZ.DISKUSSION /home/mtt/fido/msgb/sn.recht.soz.diskussion -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.RECHT.ARB.DISKUSSION /home/mtt/fido/msgb/sn.recht.arb.diskussion -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.BETR.BR+PR /home/mtt/fido/msgb/sn.betr.br+pr -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.BETR.VEREINBARUNGEN /home/mtt/fido/msgb/sn.betr.vereinbarungen -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea GN.CLUBS /home/mtt/fido/msgb/gn.clubs -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.KOO.VORSTELLUNG /home/mtt/fido/msgb/sn.koo.vorstellung -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.GEW.ALLGEMEIN /home/mtt/fido/msgb/sn.gew.allgemein -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.AKTUELL.TERMINE /home/mtt/fido/msgb/sn.aktuell.termine -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.KOO.TEST /home/mtt/fido/msgb/sn.koo.test -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.GEW.GHK /home/mtt/fido/msgb/sn.gew.ghk -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.AKTUELL.AKTIONEN /home/mtt/fido/msgb/sn.aktuell.aktionen -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.BETR.BILDUNG /home/mtt/fido/msgb/sn.betr.bildung -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.GEW.INTERNATIONAL /home/mtt/fido/msgb/sn.gew.international -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.KOO.DISKUSSION /home/mtt/fido/msgb/sn.koo.diskussion -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.GEW.HBV /home/mtt/fido/msgb/sn.gew.hbv -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.GEW.IGMETALL /home/mtt/fido/msgb/sn.gew.igmetall -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.GEW.JUGEND /home/mtt/fido/msgb/sn.gew.jugend -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea GN.CBM /home/mtt/fido/msgb/gn.cbm -a 54:490/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 54:490/980
EchoArea SN.KOO.WICHTIG /home/mtt/fido/msgb/sn.koo.wichtig -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.KOO.ANTRAEGE /home/mtt/fido/msgb/sn.koo.antraege -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.GEW.THESEN /home/mtt/fido/msgb/sn.gew.thesen -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.GEW.OETV /home/mtt/fido/msgb/sn.gew.oetv -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.FRAUEN /home/mtt/fido/msgb/sn.frauen -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.GEW.HBS /home/mtt/fido/msgb/sn.gew.hbs -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.ARB+SOZ.ALLGEMEIN /home/mtt/fido/msgb/sn.arb+soz.allgemein -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.AKTUELL.VORSCHAU /home/mtt/fido/msgb/sn.aktuell.vorschau -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.ARB+SOZ.ERWERBSLOS /home/mtt/fido/msgb/sn.arb+soz.erwerbslos -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.ARB+SOZ.DISKUSSION /home/mtt/fido/msgb/sn.arb+soz.diskussion -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.BETR.ARBSCHU+UMWELT /home/mtt/fido/msgb/sn.betr.arbschu+umwelt -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea SN.BETR.ARBEIT+TECHNIK /home/mtt/fido/msgb/sn.betr.arbeit+technik -a 49:199/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 49:199/980
EchoArea GN.SYSOPS /home/mtt/fido/msgb/gn.sysops -a 54:490/976 -b Squish -p 14 -dupeCheck move -dupeHistory 11 54:490/980
version <integer>.<integer>
version 1.9
Here you specify which version of fidoconfig your config belongs to. Currently this statement does nothing.
This statement cannot be repeated.
name <string>
name Leetebrok BBS
Here you specify your system's name.
This statement cannot be repeated.
location <string>
location Dusseldorf
You specify your location here.
This statement cannot be repeated.
sysop <string>
sysop Matthias Tichy
You specify your name with this keyword.
This statement cannot be repeated.
include <file>
include /etc/fido/areas
You can include other files into your config file. For example if you would like to have different config parts, you can include a file and (via cron job or manually) change the content of this file without changing the rest of the config. Additionally you can split your config in different parts. So you can have your fileareas definition in another file than your msgareas definition. This gives you the ability to have some survey about your config.
This statement can be repeated. But don't make recursive includes, e.g. include a file which includes another which includes the first. Although this will be detected and fixed many times, there is a chance that it will not be detected one time.
Address <addr>
Address 2:2433/1245
This command specifies which akas your system has. This statement is
full 5d compatible, which means you can have also addresses like
2:2433/1245.1@fidonet.org. The first address statement is your
main aka which will be used by tosser on different occasions, for
example if zone number could not be taken from the @INTL Kludge in
netmails.
This statement can be repeated. The domain name is not full supported throughout fidoconfig
commentChar <char>
commentChar ;
This command specifies which symbol is used to mark rest of line as comment. Default is '#'
This statement can be repeated.
seqDir <path>
seqDir /var/spool/fido/seq
Sets path for current msgid sequence stamp directory. This directory should be used for msgid sequence stamp only to preventing surprises. See seqoutrun.
By default environment variable SEQDIR is used.
This statement cannot be repeated.
seqOutrun <string>
seqOutrun 1m
Sets maximum outrun for msgid sequence from current time. See seqdir.
Use decimal number with optional suffix.
Suffixes are:
Set seconds without suffix.
By default environment variable SEQOUT is used, or 3y if it isn't set.
This statement cannot be repeated.
outbound <path>
outbound /var/spool/fido/out
This command specifies your outbound path. This outbound path is binkley-style. A binkley style outbound consists of a base path and subdirectories. Each subdirectory represents a place for all the files for one zone. The base path is the zone path for your base zone.
Example:
The zone directory contains the flow-files for each node. A Flow-file of a node has the name NNNNFFFF.?lo
For points there is a subdirectory with nodes flowfilename with suffix.pnt. In this subdirectory the flowfiles have the names PPPPPPPP ( 8-digit point number in hex).
For a deeper background on a binkley-style outbound see the binkley-term documentation and source code.
This statement cannot be repeated.
FileBoxesDir <directory>
FileBoxesDir ../boxes
This statement specifies directory where link file boxes are placed (and
created if necessary). For prevention of collisions: FileBoxesDir
and outbound should be pointed into different directory paths and
even not be subdirectory of another.
z.n.f.p[.h],
FileBoxesDir /fido/fileboxes
2:5021.19 will possibled two fileboxes:/fido/fileboxes/2.5021.19.0 and /fido/fileboxes/2.5021.19.0.h
This statement cannot be repeated.
inbound <path>
inbound /var/spool/fido/in
This command specifies where your inbound files are stored. This directory is the base directory which means if you have a connection which is not protected and the other system is not listed the files go in here. Only netmails are tossed from this inbound.
This statement cannot be repeated.
localinbound <path>
localinbound /var/spool/fido/in.loc
This command specifies the path, from which all types of netmail and echomail are tossed without any password checking. You can put pkt's here which were created by a file tosser etc. So created by a you or a programm on your own system.
This statement cannot be repeated.
protinbound <path>
protinbound /var/spool/fido/in.sec
This command specifies where files should be stored which were received during a password-protected session. All types of mail are tossed from this path. But passwords are checked before.
This statement cannot be repeated.
lockfile <file>
lockfile /var/lock/hpt.lock
Another session of HPT will be terminated if the LockFile
is exists (default setting).
This statement cannot be repeated.
See AdvisoryLock.
AdvisoryLock <integer>
AdvisoryLock 10
If value AdvisoryLock > 0, then HPT checks if
LockFile is locked by another session of HPT or not.
Program will not be terminated if the original process which created
LockFile is running. Second instance of hpt will check LockFile
for locking number of times defined by AdvisoryLock with period
of 1 second. And if the file exists, but not locked
(stale), HPT will be running...
If AdvisoryLock = 0, advisorylock is off.
This statement cannot be repeated.
Don't use this under BeOS! (there is no locking mechanism).
See LockFile.
tempDir <path>
tempDir /var/tmp
This command specifies the path where the temporary files of the fido-programs should be stored. This directory can be erased while booting. Good idea is to set it to a memory disk.
Default value is path specified by TEMP, TMP or TMPDIR enviroment variables (use TEMP first, if it not defined then use TMP, next use TMPDIR). If these enviroment variables are not defined: - win32 versions use %WINDIR%\TEMP (usually c:\windows\temp for Win9x/Me and c:\winnt\temp for Windows NT/2000/XP) - versions for unix-like OS'es use /tmp - other versions use c:\
This statement cannot be repeated.
logFileDir <path>
logFileDir /var/spool/log/fido
This command specifies the path where the log-files of the fido-programs should be stored.
This statement cannot be repeated.
Some programs use logFileDir for persistent temporary/work files.
syslogFacility <facility>
syslogFacility local0
Some Husky programs are able to write logs via syslogd instead of via log
file. For those programs, this keyword defines which facility to use for
writing to the syslog. Syslogd will use this facility name to decide which
syslog logfile the log messages will go to. Common names that can be used
include mail, news, uucp, local0. The exact
values that can be used depend upon your operating system. Refer to the man
page for syslog.conf or /usr/include/sys/syslog.h for more
information.
Logging via syslogd is only supported on UNIX platforms, and currently only used by herp, but not by any other Husky program. If a Husky program logs via log file or via syslog or both depends on the program and not on your fidoconfig file. Consult the individual program's documentation.
loglevels <string>
loglevels 1345789,A-F Q
This statement defines log levels list for writing messages into log file. Hiphen is a range char (A-F expands to ABCDEF). Only alpha & numeric log level characters are recognized, others are ignored.
In example we output to log messages with levels 3,4,5,7,8,9,A,B,C,D,E,F,Q.
The log levels are following:
Default value: 1234567890ABCDEF
This statement cannot be repeated.
Screenloglevels <string>
Screenloglevels 2345789,A-C
Sets levels of log output to screen. See loglevels for details.
This statement cannot be repeated.
logDateFormat <string>
logDateFormat "%H:%M:%S "
Set date format for log messages. The parameter expected to be a valid strftime() format string. The following macros are expanded to current date/time value (incomplete list):
| %d | current day of month as a decimal number, zero-prefixed (01-31)
|
| %e | current day or month as a decimal number, space-perfixed ( 1-31)
|
| %H | current hour as a decimal number (00-23)
|
| %M | current minute as a decimal number (00-59)
|
| %m | current month as a decimal number (01-12)
|
| %S | current second as a decimal number (00-59)
|
| %Y | current year with century as a decimal number (for example, 2005)
|
| %y | current year without century as a decimal number (for example, 05)
|
| %A | national representation of the full weekday name (for example, Monday)
|
| %a | national representation of the abbreviated weekday name (for example, Mon)
|
| %B | national representation of the full month name (for example, April)
|
| %b | national representation of the abbreviated month name (for example, Apr)
|
Please refer to strftime() manual page to see the complete list of macros allowed. National representation of month or weekday name is determined by the current locale.
This statement cannot be repeated.
logEchoToScreen <bool>
logEchoToScreen
Enable or disable log messages screen output. See also See ScreenLogLevels.
This statement cannot be repeated.
Pack zip|tgz|rar|arc|arj|..... <call>
Pack zip zip -9 -g -q $a $f
This statement sets the command line call for the packer. The file will be moved into the archive, that means the file will be deleted from the harddisk. It only remains in the archive.
$a will be replaced by the archive file.
$f will be replaced by the file which should be packed into the archive.
If some husky program is compiled with hptzip, you can use the following definition to use internal zip packer:
Pack zip zipInternal
Warning: You can't use shell input-output redirection chars under DOS or Win* platforms: hpt implementation uses workaround for command.com bug and doesn't run command.com to execute external commands such as packers/unpackers. hpt calls OS function to execute them instead of command.com.
Note: On some OSes, if a program called can't be found (can't be run) result of pack command is undefined. (Example: DOS. Reason of this: command.com does not return error code if executable file was not found.) To prevent danger write full path name for packer program, please.
This statement can be repeated.
Unpack "<call>" <offset> <matchcode>
Unpack "c:\arc\pkunpak /r $a $p $f" 0 1a
Unpack "c:\arc\pak e /wn $a $p" -2 fe
Unpack "c:\arc\lha e /m $a $p $f" 2 2d6c68
Unpack "c:\arc\zoo e:O $a $p $f" 0 5a4f4f
Unpack "c:\arc\jar e -y $a $p $f" 14 1a4a61721b
# *.rar
Unpack "c:\arc\unrar e -y -c- -o+ -inul $a $p $f" 0 52617221
# rar-sfx/DOS
Unpack "c:\arc\unrar e -y -c- -o+ -inul $a $p $f" 28 52534658
Unpack "/usr/bin/zoo e:O $a $p $f" 0 5a4f4f
Unpack "/usr/bin/arc eno $a $p'*.*' $f" 0 1a
Unpack "/usr/bin/unzip -joLqq $a -d $p $f" 0 504b0304
Unpack "cd $p && /usr/bin/unarj e $a $f>/dev/null" 0 60ea
Unpack "/usr/bin/unrar e -y -c- -o+ -inul $a $p $f" 0 52617221
Unpack "/usr/bin/unrar e -y -c- -o+ -inul $a $p $f" 28 52534658
Unpack "/usr/bin/jar e -y $a $p $f" 14 1a4a61721b
Unpack "cd $p && /usr/bin/ha eyq -e $a $f" 0 4841
This statement sets the call of certain unpackers according to the id in the archive file
call is the command line call for the packer (enclosed into quotes!);
offset position of recognition string in packed file;
match code hexdump of the recognition string for packed file, ?? can be used as any byte;
$a will be replaced by the archive file to extract from;
$p will be replaced by the path to unpacked files (usually tempoutbound);
HPT-specific: $p will be replaced by the temp inbound path.
$f will be replaced by the description file name if any (used by htick, see 'FileDescName' token; possibly other husky programs).
e.g.: unpack "unzip -joLqq $a -d $p $f" 0 504b0304
files packed by zip can be recognized by
504b0304(hex) at offset 0(integer)
they can be unpacked by htick using command
"unzip -joLqq <filename> -d <path> <descrption_filename>"
if some husky program is compiled with hptzip, you can use the following definition:
Unpack zip zipInternal 0 504b0304
Warning: You can't use shell input-output redirection chars under DOS or Win* platforms: hpt implementation uses workaround for command.com bug and doesn't run command.com to execute external commands such as packers/unpackers. hpt calls OS function to execute them instead of command.com.
Also see hpt and htick documentation.
This statement can be repeated.
Note: On some OSes, if a program called can't be found (can't be run) result of unpack command is undefined. (Example: MS DOS. Reason of this: command.com does not return error code if executable file was not found.) To prevent danger write full path name for unpacker program, please.
These keywords relate to Link section of config. Every link of your system should be defined
via it's own link entry. Definition of link begins with keyword Link.
Immediately after it you should put any settings for that link. Link section
is considered as closed on first keyword which isn't allowed in link section.
All the following keywords except Link and LinkDefaults which start section
are allowed inside it.
Note: '*' mark in keywords here means that it should be either substituted with robot's name to which appropriate setting is applied or omitted to apply to all robots.
link <string>
link Matthias Tichy
This statement starts a new Link-definition. All the following link-related statements change the configuration of this link until a new link statement is found. A parameter is the name of this link.
This statement can be repeated.
linkdefaults [begin | end | destroy]
linkdefaults
This statement starts section of default definitions of links.
All the following link-related statements change default configuration
of link until a 'link' or 'linkdefaults end' or
'linkdefaults destroy' statement is found.
All parameters collected in linkdefaults sections are copied to link
configuration every time when 'link' statement is found in
configuration file. Link-related statements after 'linkdefaults end' or
'linkdefaults destroy' or before first 'link' or
'linkdefaults' statement are treated as error.
'linkdefaults' statement without 'begin' or 'end' means
'linkdefaults begin'
'linkdefaults destroy' destroys all default definitions.
Be careful with Pause, Export, etc. ;-)
This statement can be repeated. New definitions overwrite old ones.
aka <addr>
aka 2:2433/1245
This statement sets the aka for the current link.
This statement can only be repeated for different links.
ouraka <addr>
ouraka 2:2433/1247
This statement sets the aka which is used for this link.
This statement can only be repeated for different links.
password [<string>]
password secret
This statement sets the default password for the link. If you do not set the other passwords, this password will be used. Password may be case insensitive or case sensitive depending on the program.
There is no limit for Password length except the PktPwd.
This statement can only be repeated for different links.
pktpwd [<string>]
pktpwd geheim
This statement sets the pktpassword for the actual link. Only passwords with maximal 8 characters are valid because of limitations of other software packages. An empty statement is allowed.
If you do not set the pktpwd, password from the common password statement will be used (See password.)
This statement can only be repeated for different links.
ticpwd [<string>]
ticpwd geheim
This statement sets the ticker password for the actual link. Only passwords with maximal 8 characters are valid because of limitations of other software packages. An empty statement is allowed.
If you do not set the ticpwd, password from the common password statement will be used (See password.)
This statement can only be repeated for different links.
areafixpwd [<string>]
areafixpwd geheim
This statement sets the areafix password for the actual link. An empty statement is allowed, but not recommended.
If you do not set the areafixpwd, password from the common password statement will be used (See password.)
This statement can only be repeated for different links.
remoteRobotName <string>
remoteRobotName allfix
Set remote system "areafix" to new name. This token used when requests to subscribing/unsubscribing of new areas forwarded to this link.
This statement can only be repeated for different links.
filefixpwd [<string>]
filefixpwd geheim
This statement sets the filefix password for the actual link. An empty statement is allowed, but not recommended.
If you do not set the filefixpwd, password from the common password statement will be used (See password.)
This statement can only be repeated for different links.
bbspwd [<string>]
bbspwd geheim
This statement sets the bbs password for the actual link. An empty statement is allowed.
If you do not set the bbspwd, password from the common password statement will be used (See password.)
This statement can only be repeated for different links.
sessionpwd [<string>]
sessionpwd geheim
This statement sets the session password for the actual link. An empty statement is allowed.
If you do not set the sessionpwd, password from the common password statement will be used (See password.)
This statement can only be repeated for different links.
handle <name>
handle eddie
This statements gives a link a nickname. This statement is supposed for bbs systems.
This statement can only be repeated for different links.
packer <packer>
packer zip
This statement sets the packer for the link. You can use the packer
which you has set up using the Pack statement. If you omit this
statement or set Packer none no mail will be packed. The pkt's
will be stored in the outbound.
If you use hptzip (Zlib) library, you can set <packer> - zip.
This statement can only be repeated for different links.
autocreate <bool>
areafixAutoCreate on
This statement gives a link the permission to create echoareas on your system just by sending messages in them and fileareas by sending files in the areas.
The echoareas are created using the areafixAutoCreateDefaults contents:
EchoArea <areaName> <msgBaseDir><areaName> -a <mypktaddr> -b Squish <areafixAutoCreateDefaults> <linkAddr>
Default message base type is Squish. But you can set "-b Jam" or "-b
Msg" in areafixAutoCreateDefaults.
Similar rules apply to creating fileareas.
This statement can only be repeated for different links.
autoCreateFile <file>
areafixAutoCreateFile /etc/fido/areas.matthias
This statement defines where autocreated areas by this link are going to. If you omit this statement the default configuration file will be used. The tosser must have the rights to create and change the file.
You must include the specified file for yourself into fidoconfig, so these autocreated areas will be founded in subsequent tosser-runs.
autoCreateFile and Include strings must be the *same*.
This statement can only be repeated for different links.
*autoCreateDefaults <string>
areafixAutoCreateDefaults -$m 200 -dupecheck movefilefixAutoCreateDefaults -p 90
Set default options for autocreated echo or file areas. Please do not put
any paths or passthrough keyword here, use MsgBaseDir or
FileAreaBaseDir for that globally or LinkMsgBaseDir and
LinkFileBaseDir for specific links.
When an echo (or fileecho) is created, EchoArea (or FileArea)
keyword is written to the area declaration first, then areaname, then path
to the area file (area directory for fileecho) or passthrough keyword,
then the options from AutoCreateDefaults and after that the address
of the link creating the area. The options from AutoCreateDefaults
override the options from the current EchoAreaDefaults or
fileAreaDefaults.
This statement can only be repeated for different links.
*AutoSubscribe <bool>
filefixAutoSubscribe on
Automatically subscribe the link to all autocreated areas. On default it
is off for all links. The value of AutoSubscribe does not influence
already existing areas. If you want to subscribe a link to all existing
areas in a group, use EchoAreaDefaults or fileAreaDefaults.
This statement can only be repeated for different links.
*forwardRequests <bool>
forwardRequests on
By default "forwardRequests off". "On" allow forward requests to this
link from other links. If no forwardRequestFile or
forwardRequestMask defined, then forwardRequests unconditional.
LinkGrp can deny access to some links...
This statement can only be repeated for different links.
See LinkGrp.
FwdDenyFile <file>
areafixFwdDenyFile /etc/fido/denyfwdafix
Don't forward requests for areas from this file. Pattern matching does not supporting!
This statement can only be repeated for different links.
FwdDenyMask <string>[,<string> ...]
areafixFwdDenyMask TYT.*, *FLAME*
Don't forward this requests.
This statement can only be repeated for different links.
denyFwdReqAccess <bool>
areafixDenyFwdReqAccess
Don't allow forward requests from this link (via * robot) to your links.
This statement can only be repeated for different links.
denyUncondFwdReqAccess <bool>
areafixDenyUncondFwdReqAccess
Don't allow unconditional forward requests from this link (via * robot) to your links.
This statement can only be repeated for different links.
FwdFile <file>
FwdFile /etc/fido/fidonet.na
File for forward requests (also for available areas and descriptions). If file contains area descriptions they will be used when autocreating areas. If not defined then forward requests unconditional.
This statement can only be repeated for different links.
FwdMask <string>[,<string> ...]
*FwdMask nsk.*
If area nsk.* (nsk.test for example) will be requested by downlink and forwardrequests to uplink are allowed, then it is created and request goes to uplink. If area doesn't covered by mask list, then checks the next link for forwardRrequests.
This statement can only be repeated for different links.
FwdPriority <integer>
areafixFwdPriority 1
By default forward requests processing for links in order as they defined in config. But you can set priority for some links... "1" is the first link to forward requests, "2" is the second, etc.
This statement can only be repeated for different links.
EchoLimit <integer>
EchoLimit 50
This is maximum areas which can be subscribed via * robot for this link.
This statement can only be repeated for different links.
pause ([on]|off|earea|farea)
pause
pause earea
pause
Stop export echomail, fileechoes or both for this link.
This statement can only be repeated for different links.
See also AutoPause section.
export <bool>
export off
By default "Export on".
If "Export" is "off", mail is not tossed to link. You can restrict effect of this setting to particular groups. OptGrp
This statement can only be repeated for different links.
import <bool>
import off
By default "import on".
Same as Export, but this is for mail from link.
This statement can only be repeated for different links.
optgrp <string>[,<string> ...]
optgrp A,X,Fido
This setting restricts effect of Export, Import & Mandatory options
to the given groups. If OptGrp is not defined - the restrictions
will be applied to all areas. If OptGrp is defined
then link will have default import/export access to all groups other than
explicitly given in this statement.
This statement can only be repeated for different links.
accessgrp <string>[,<string>...]
accessgrp A,B,C,Local
This statement connects a link to several echomail groups. See also
PublicGroup and -g <group> in echoarea options.
This statement can only be repeated for different links.
linkgrp <string>
linkgrp Fido
Specifies a group to use for areas auto-created from this link. Also link
can delete echo areas in his LinkGrp group.
In this example:
1) string Fido will be added to a new area record unless
areaixAutoCreateDefaults defines an implicit group;
2) links that have no access to the Fido group can't forward requests
to uplink with LinkGrp Fido;
3) this link can delete echo areas with -g Fido group.
This statement can only be repeated for different links.
mandatory <bool>
mandatory on
By default "mandatory off".
This statement disallows the link to unsubscribe areas via areafix.
This statement can only be repeated for different links.
manual <bool>
manual on
By default "manual off".
This statement disallows the link to subscribe areas via areafix.
This statement can only be repeated for different links.
level <integer>
level 200
Access level. Used to control read/write access to areas. By default "level 0".
This statement can only be repeated for different links.
EchoArea <name> <file> [-b <msgbase>] [Options] [linkAKAs] [linkOptions]
EchoArea linux.develop.ger /var/spool/fido/msgb/linux.develop.ger
-b Squish -a 2:2433/1247 -g A -dupeCheck move -dupehistory 11 -d "Linux
development" 2:2433/1245 -def
This statement specifies the echoareas.
Msg is standard (OPUS *.msg-base). Write Squish for an
Squish-msgbase and Jam for Jam-msgbase.
Options:
Level in link options);
integer can't be negative;
integer can't be negative;
-mandatory;
-manual;
-noPack;
-killRead;
-keepUnread;
-kill;
-keepsb;
-tinysb;
-killsb;
-dosfile;
DupeArea or delete dupes.
CommonDupeBase, 7 days if not defined
(See AreasMaxDupeAge.);
EchoAreaDefaults.
(*) - these tokens to be removed from areafixAutoCreateDefaults when
creating passthrough areas.
LinkOptions:
Link Options -r -w are left for backward compatibility. We strongly recommend to use tokens ReadOnly & WriteOnly for setting permissions on arealinks.
This statement can be repeated.
The msgbase MSG is limited to 65536 messages. This is SMAPI
implementation limit.
EchoAreaDefaults [-b <msgbase>] [Options]
EchoAreaDefaults -b Squish -a 2:280/1507 -g F -dupeCheck move -dupehistory 11 -p 14 2:280/1126
With this keyword you can specify settings that will be set for the
EchoArea and LocalArea definitions that follow. It makes
the echoarea definitions shorter. All echoarea settings can be used
except the areaname and path.
When you specify a different value in an echoarea definition, it overrules the default setting.
With the default from the example above, an echoarea definition could be:
EchoArea fidosoft.husky /var/spool/fido/msgb/fidosoft.husky -d "husky
develpment" 2:280/6207
This will internally be expanded to:
EchoArea fidosoft.husky /var/spool/fido/msgb/fidosoft.husky -d "husky
develpment" -b Squish -a 2:280/1507 -g F -dupeCheck move -dupehistory 11
-p 14 2:280/1126 2:280/6207
Another example:
EchoArea evolution /var/spool/fido/msgb/evolution -d "about fantasies" -p 100
that will be expanded to:
EchoArea evolution /var/spool/fido/msgb/evolution -d "about fantasies"
-b Squish -a 2:280/1507 -g F -dupeCheck move -dupehistory 11 -p 100
2:280/1126
As you will notice, the default settings are combined with the additional settings in the EchoArea definition, and the messages are purged after 100 days instead of 14 (the default).
This statement can be repeated.
An EchoAreaDefults setting is valid until a next EchoAreaDefaults
setting.
EchoAreaDefaults can also be switched off with an empty definition:
EchoAreaDefaults [OFF]
The word 'OFF' is not needed but makes it more readable.
BadArea <name> <file> [-b <msgbase>] [Options]
BadArea badarea /var/spool/fido/msgb/bad -b Squish
This statement specifies the BadArea. Messages which have no area on
your system go to the badArea.
See EchoArea, for details on Options.
Like all areas BadArea is *.msg base per default.
This statement cannot be repeated.
dupeArea <name> <file> [-b <msgbase>] [Options]
dupeArea dupeArea /var/spool/fido/msgb/dupes -b Squish
This statement specifies the DupeArea. Messages which area dupes
e.g. come to your system the second time, will be put in the DupeArea.
See EchoArea, for details on Options.
Like all areas DupeArea is *.msg base per default.
This statement cannot be repeated.
NetmailArea <name> <file> [-b <msgbase>] [Options]
NetmailArea netmail /var/spool/fido/msgb/netmail -b Squish
This statement specifies the NetMailArea. See EchoArea,
for details on Options. Like all areas NetmailAreas is *.msg
bases per default.
This statement can be repeated to use different netmailareas.
See NetArea.
This statement can be repeated.
NetArea <name> <file> [-b <msgbase>] [Options]
NetArea netmail /var/spool/fido/msgb/netmail -b Squish
See NetMailArea.
This statement can be repeated.
robotsArea <string>
robotsArea SecondNetMail
Specifies area used for areafix and filefix scanning. Replies from robots will also be stored here. RobotsArea must be NetmailArea for security purposes!
This statement cannot be repeated.
LocalArea <name> <file> [-b <msgbase>] [Options]
LocalArea linux.develop.ger /var/spool/fido/msgb/linux.develop.ger -b Squish -a 2:2433/1247 -dupeCheck move -dupehistory 11 -d "Linux development"
This statement creates an LocalArea. The only difference between
a LocalArea and an EchoArea is that a LocalArea has
no links and is not scanned for new mails.
This statement can be repeated.
FileArea <name> <fileareapath> <uplink> [options] [<downlinks>]
filearea Photoes /var/spool/fido/fileecho/Photoes 2:50/1 -d "Sysop photoes"
This statement specifies the FileArea: fileecho definition.
Read HTick documentation for details.
bbsarea <name> <bbsareapath>
BBSarea Incoming /var/spool/fido/BBS/incoming
This statement specifies the BBSArea: BBS file area definition.
It's used for filelist building.
Read HTick documentation for details.
AreaGroup <group name> <pattern list>
AreaGroup RUSSIAN ru.* su.*
You can group areas by their names and then apply some default options to such areas. <group name> is a unique handle for every group. <pattern list> is a list of patterns with wich area names will be compared. If area name equals to some of patterns in group it will be assigned to this group. Pattern lookup will be performed in order you wrote them.
If you define AreaGroup once and then define it again with the same name patterns from these two definitions will be joined.
AreaGroup DN dn.*
AreaGroup DN dnepr.* 464.*
will produce patterns as if you define
AreaGroup DN dn.* dnepr.* 464.*
This statement can be repeated.
AreaGroupDefaults <group name> <options>
AreaGroupDefaults RUSSIAN -p 14 -dupehistory 11
This token defines default options for areas in group (see AreaGroup
token). Options are the same as in EchoArea or EchoAreaDefaults.
Parsing priority:
EchoAreaDefaults (if defined)
AreaGroupDefaults (if areaName suits pattern from one of groups)
EchoArea
grpDesc <group name> <group description>
grpDesc A "Echomail areas from 2:5020/52"
grpDesc Pvt Private areas
This statement defines description for the group of areas. Both name and description can be optionally enclosed by double quotes ("). Note that you can use a variable-length string for group name, not just a single char.
This statement can be repeated.
PublicGroup <string>[,<string>,...]
PublicGroup local,a,b,othernet
Specifies groups for public echo acess.
This statement cannot be repeated.
ReadOnly <addressMask> <areaMask>
ReadOnly 2:5021/19.* tver.sysop*
This statement set one or many links to writeonly for specified area masks. If you write node address do it *without* trailing .0!
If areaMask begins with '!' symbol it means that links won't be set readonly for areas that match areaMask
ReadOnly 2:5021/19.* tver.sysop*
ReadOnly 2:5021/19.1 !tver.sysop*
ReadOnly 2:5021/19.2 !tver.sysop.talks
ReadOnly 2:5021/192 ru.anekdot
It means that all points if 2:5021/19 set r/o for tver.sysop* echoareas and fileareas except 2:5021/19.1 for all areas and 2:5021/19.2 can write only to tver.sysop.talks from tver.sysop* areagroup. Last rule implements a read-only status of ru.anekdot (echo)area for node 2:5021/192.
This statement can be repeated.
WriteOnly <addressMask> <areaMask>
WriteOnly 2:5021/19.* NobodyReadArea
This statement set one or many links to writeonly for specified area masks. If you write node address do it *without* trailing .0!
This statement can be repeated.
createAddUplink [<bool>]
createAddUplink
If enabled, the link from which an area is auto-created is marked as the default uplink for this area. It is turned off by default. Please note that you cannot use autoCreateDefaults for that.
This statement cannot be repeated.
createAreasCase (Lower|Upper)
createAreasCase Upper
This statement defines case of areanames in autocreation. Default is lower case.
This statement cannot be repeated.
createFwdNonPass <bool>
createFwdNonPass
Autocreate non-passthru echoes in forward request operations. MsgBaseDir should be not passthrough!
This statement cannot be repeated.
reportRequester <bool>
reportRequester off
reportRequester on
By default, the link who requested an area is displayed in the auto-create report. This keyword disables showing it.
This statement cannot be repeated.
ReportTo <string>
ReportTo netmail
Set name of echoarea or netmailarea to place autocreate reports.
This statement cannot be repeated.
Robot <robot name>
Robot AreaFix
This keyword begins Robot section. All the following robot-related statements
change the configuration of this robot until a new Robot statement is found.
Currently used names are 'default', 'Areafix' and 'Filefix'.
Values set for default robot are used as defaults for other robots.
FromName <string>
FromName "HPT AreaFix"
Use value from FromName in field From when
responding on messages to areafix. If this token not defined, name in
original message will be used. Example:
1) FromName not defined in config:
Original message to areafix:
----------------------------
From: Sysop
To: ArEaFiX
AreaFix's response:
-------------------
From: ArEaFiX
To: Sysop
2) FromName "HPT AreaFix"
Original message to areafix:
----------------------------
From: Sysop
To: ArEaFiX
AreaFix's response:
-------------------
From: HPT AreaFix
To: Sysop
Also this value is being used when creating reports by qrep command.
HelpFile <file>
HelpFile /etc/ftn/areafix.hlp
This is help file, which robot sends to link if he requests "%HELP".
This statement cannot be repeated.
KillRequests <bool>
KillRequests
Delete requests from links to robot.
This statement cannot be repeated.
MsgSize <integer>
MsgSize 20
This option set up maximum robot message size (20 kb). If not defined, reports will be not splitted...
This statement cannot be repeated.
RobotNames <string>
RobotNames SqaFix, hptfix
Set additional names for robot. Default names for Areafix robot are "areafix", "areamgr", "hpt". Default names for Filefix robot are "FileFix", "FileMgr", "AllFix", "FileScan", "htick".
This statement cannot be repeated.
RobotOrigin <string>
RobotOrigin c0()1 $tAt10n
the origin string in robot's reports will be like this: * Origin: c0()1 $tAt10n (<your addr>)
This statement cannot be repeated.
QueryReports <bool>
QueryReports off
This statement enables/disables including linked areas list into all robot replies.
Default: off.
This statement cannot be repeated.
QueueFile <string>
QueueFile /fido/datafiles/areafix.queue
This command specifies the queue file containing your delayed forward-requests.
Hpt must have read/write rights for this file.
To use this feature run hpt qupd periodically.
Note: Don't set this to the same value for different robots. It may lead to confusion and unexpected behaviour.
This statement cannot be repeated.
ReportsAttr <attr>
ReportsAttr pvt loc k/s
ReportsAttr pvt,loc,k/s
Set attributes to robot's reports.
Valid attributes are:
Default is "pvt loc k/s npd".
If this statement is used inside Link or LinkDefaults section, it sets attributes for this particular link. Otherwise it defines attributes used by default.
This statement can be repeated for different links.
SplitStr <string>
SplitStr > Message splitted. To be continued...
This string added after splitted robot's messages.
This statement cannot be repeated.
AutocreateFlag <file>
AutocreateFlag /etc/ftn/flags/aac.flag
Create file-flag after autocreating area. This feature can be used for execute some scripts after tossing.
This statement cannot be repeated.
newAreaRefuseFile <file>
newAreaRefuseFile /etc/ftn/areas/dontcrte.lst
This token defines a file which will be used when autocreating echoarea. File contains list of areas which we don't allow to autocreate. Subscribtion on such areas is also refused because such areas are marked as dead. Each line of this file is a mask of echotag.
Example:
This statement cannot be repeated.
ForwardRequestTimeout <number>
ForwardRequestTimeout 7
This statement specifies time to wait (in days) for area requested from
uplink. If there is no traffic in this area, <program> qupd unsubscribes
area from this uplink and subscribes to it at next uplink. If next uplink
for this echoarea not avaiable, <program> qupd removes echoarea from queue.
To use this feature run <program> qupd daily.
This token requires keyword QueueFile. See QueueFile.
Default is 7 days.
This statement cannot be repeated.
IdlePassthruTimeout <number>
IdlePassthruTimeout 3
This statement specifies time to wait (in days) before unsubscribing echoarea from uplink after the time last downlink unsubscribed (one uplink rest).
To use this feature run <program> qupd daily.
This token requires keyword QueueFile. See QueueFile.
Default is 3 days.
This statement cannot be repeated.
KilledRequestTimeout <number>
KilledRequestTimeout 4
This statement specified time wait (days) for delete from config echoarea after unsubscribe it from uplink (last link).
Run <program> qupd daily for use this feature.
This token requires keyword QueueFile. See QueueFile.
Default is 4 days.
This statement cannot be repeated.
AutoAreaPause <bool>
AutoAreaPause
default: off (disabled)
Enables or disables area pause algorythm. If area is passthrough and there is only uplink alive (link with "-def" flag set) while other links are paused, unsubscribe message will be sent to uplink and "-paused" flag will be set to area. If another link subscribes to the area, or one of already paused links resumes his subscription, area will be subscribed at uplink again and "-paused" flag cleared. Note, that links cannot send messages to paused area, they will be moved to badmail. If enabled, algorythm also works if link is paused by AutoPassive.
You may disable or enable algorythm for a particular area by setting one of "-noautoareapause" or "-autoareapause" flags.
This statement cannot be repeated.
Since popular mail readers, BBS programs and mailers does not support fidoconfig, we have developed programs that convert your fidoconfig to these config file formats.
Golded+ by Alexander A.Aganichev supports fidoconfig and converter isn't needs, MsgEd TE 6.x and above integrated with fidoconfig.
Also we have developed program to convert configuration files of Fastecho tosser program into fidoconfig, to make migration from Fastecho to fidoconfig (and hpt) more easy.
Synopsys:
fconf2golded <goldedConfigFileName> [<default.cfg>]
Example:
fconf2golded ~/golded/golded.cfg ~/golded/goldDefaults.cfg
Synopsys:
fconf2msged <msgedConfigFileName>
Example:
fconf2msged ~/msged.areas
Synopsys:
fconf2aquaed <aquaedConfigFileName> [<default.cfg>]
(if you specify default.cfg there will be a include <default.cfg> generated in
your config file)
Example:
fconf2aquaed ~/aquaed/aquaed.cfg
Synopsys:
fconf2binkd [-v] [-h] [-c path/to/fidoconfig] [-f] [-p] [output_file_name]
See details in fconf2binkd(1) man page or fconf2binkd.html.
Examples:
fconf2binkd -c ../husky/config -p binkd.pwd
fconf2binkd binkd.conf
Synopsys:
fconf2fidogate <FidoGateAreasFileName> [<default.cfg>]
(you may read config defaults from default.cfg)
Example:
fconf2fidogate /usr/local/lib/fidogate/areas
Synopsys:
fconf2squish (<squish.cfg>|-) [<default.cfg>]
(- as squish.cfg means stdout)
(you may read config defaults from default.cfg)
See details in fconf2squish(1) man page or fconf2squish.html
Examples:
fconf2squish ~/squish/squish.cfg
fconf2squish - | grep -i echo >sqechoes.cfg
Synopsys:
fconf2tornado -[command [-command...]] <tornado.ctl> [<default.cfg>]
(you may read config defaults from default.cfg)
See details in fconf2tornado(1) man page or fconf2tornado.html
Examples:
fconf2tornado -ff -g -grLocal filearea.ctl temp.ctl
fconf2tornado -mel -ss256 c:\bbs\tornado\msgarea.ctl
Synopsys:
fecfg2fconf [path]fastecho.cfg [output fidoconfig]
Example:
fecfg2fconf c:\fido\fastecho\fastecho.cfg fidoconfig.tmp
You should run tparser everytime you have changed the config. If tparser found error in config please correct your config file and try again.
tparser -Dmodule=hpt | less
tparser (like any fidoconfig program) will display error messages if you have made an error in the config. It also may be display some warnings about your config settings. It will grumble on every Keyword it does not know. It will stop after the first error (not warning) to give you the ability to change your config.
var to value.
You can reach me at
mtt@tichy.de
2:2432/645
and in the fido echoarea
linux.develop.ger
fidosoft.husky
Max Levenkov:
sackett@mail.ru
ru.husky (russian)
ru.echoprocessors (russian)
fidosoft.husky (english)
The actual fidoconfig library and other fido software will be on http://husky.sourceforge.net.